Installation Instructions
Table Of Contents
Chapter 5 Configuring the OneCell system
OneCell
®
Installation and Commissioning, RP5000 series, Release 4.0 5-5
D
R
A
F
T
NOTE
CommScope has certified Cisco 2960-X and HP 2530 series Ethernet switches in
the OneCell network.
NOTE
The Uplink Multicast feature in OneCell requires IGMP snooping configuration
changes on all Ethernet switches.
NOTE
IGMP snooping monitors IGMP traffic between multicast routers and hosts, and
uses learned information to forward traffic to interfaces who’s clients want to
receive the traffic. In the absence of a multicast router in a network, an IGMP
querier is configured to solicit requests from hosts that want to receive IP multicast
traffic.
19 Add RP as required Tagged
Untagged
IQ
1588
20 Add RP as required Tagged
Untagged
IQ
1588
21 Add RP as required Tagged
Untagged
IQ
1588
22 Add RP as required Tagged
Untagged
IQ
1588
23 Add RP as required Tagged
Untagged
IQ
1588
24 Add RP as required Tagged
Untagged
IQ
1588
Optional BC - port 1 Untagged Boundary
Clock
Table 5-1. Ethernet switch port assignments
Port # Destination VLAN Type VLAN ID