Installation Instructions
Table Of Contents
Chapter 4 RP5100i installation
4-28 913035 4.0.04 June 2019
DR
AFT
Pole mount
The Radio Point can be pole mounted. This configuration is used for building where
there are no drop ceilings.
Mounting the Radio Point (RP) on a pole requires the following hardware
provided by
CommScope in the mounting kit:
• Mounting bracket
• Screws
Figure 4-4. Mounting bracket kit contents
Mounting the Radio Point (RP) on a pole requires the following hardware provided by
the system integrator:
• Adjustable clamp at least 2 inches large
r than the circumference of the pole
Pole mount installation
1 Attach the
bracket to the Radio point.