Installation Instructions
Table Of Contents
Chapter 4 RP5100i installation
4-22 913035 4.0.04 June 2019
DR
AFT
Flown mount installation
1 Attach
the threaded, 3/8-inch rod, cut to the required length, to the ceiling.
2 Ins
tall the nut and a flat washer on the rod.
3 Slid
e the octagon box on the rod and install a flat washer and the nylon lock nut.
NOTE: Be sure the bracket is tight between the nuts and there is enough clearance
at the end of the rod to attach the bracket to the Radio Point.