Installation Instructions

Chapter 4 RP5100i installation
OneCell
®
Installation and Commissioning, RP5000 series, Release 4.0 4-21
DR
AFT
Figure 4-3. CommScope flown mount kit contents
Octagon
box
Clamp with
1 screw
Mounting plate for
octagon box with 2
screws
Mounting plate for RP
with 4 screws
Mounting the Radio Point (RP) in the flown configuration requires the following
hardware provided by the system integrator:
Rod, 3/8-inch threaded
•Nut
Lock nut, nylon
Flat washers