Installation Instructions
Table Of Contents
Table 1-1. Baseband Controller physical port assignments
Port Number Description
MGMT MGMT port to configure OneCell through the WebGUI
0 Not used
1-6 1 GB ports for IQ data connection
between Baseband Controller and
Radio Point (RP) through an Ethernet switch on copper cable
7 Boundary clock, IEEE1588 input
dual media RJ45 or SFP port
8 Back haul dual media RJ45/SFP data port
9 Dual media RJ45/SFP port for front haul
RP management, RP timing
IEEE1588, Redundancy, High Availability
10 Dual media port provides 1588 timing/SOAP/XML to Radio Point
(RP) units. Either this copper port or fiber port 10 (SFP not provided) is
used to provide 1588 timing to RPs
11 10G/SFP+ fiber port for front-haul IQ data
12 Not used
Copper wire ports
Fiber optic ports
Chapter 1 CommScope OneCellĀ® overview
1-4 913035 4.0.04 June 2019
DR
AFT
Figure 1-2. Baseband Controller ports