Installation Guide

Chapter 2 RP5200 installation
2-2 M0304AG 5.5.01 April 2021
D
R
A
F
T
RP5200 installation overview
The RP5200 is the Radio Point for indoor solutions.
There are two configurations for installing the RP5200, which are dependent on the
ceiling type.
• Ceiling mount
• Wall mount
NOTE
Once the Radio Point is installed and powered on, it may take up to 20 minutes for
the frequency to stabilize and lock.
NOTE
If the MR port is connected to a switch that does not provide IEEE802.3bt, type-4
PoE power, the SR port can be used to provide power with a PoE++ injector. For
more information, see ONECELL
®
Network Planning Guide, v5.5 (M0304AF).
The red text above needs to be modified.
The PRIMARY port is the Data and Power connection,
the SECONDARY Port is for power only.
Sohil should review