User's Manual
Table Of Contents
- Contents
- List of figures
- List of tables
- New in this release
- About this document
- Part I: Overview and preparation
- Airvana OneCell overview
- Preparing to install the OneCell system
- Part II: OneCell component installation
- Baseband Controller installation
- Radio Point Installation
- Part III: Appendices
- Safety
- Specifications
- Installation troubleshooting
Appendix B Specifications
B-2 913020 10.05 April 2015
D
R
A
F
T
Electrical ratings and technical data
The following table lists the electrical ratings and technical data for the Baseband
Controller Unit.
SPF/SPF+ specifications
The following table lists the SPF and SPF+ specifications required for the Baseband
Controller Unit.
Operating Environment 0 to 40°C, 10 to 90% relative humidity, indoor use only, not for wet
environments
Electrical Rating 100 - 230 AC, 2.0A, 50 - 60Hz (auto ranging, no adjustment
required)
Dimensions 19”w x 1.75”H x 18.8” D (483mm W x 44.4mm H x 477mm D)
Weight Single CU 13.1 lbs (5.9 KG), Dual CU 19.1 lbs. (8.7 KG)
Safety IEC 60950-1 2005 (Second edition) + A1:2009
1G SFP LC SX Transceiver; 220M to 1K M
1G SFP LC LX transceiver, 550M 10K M
10G SFP+ LC SR Transceiver; Multi mode 26M to 300M
10G SFP+ LC SR Transceiver; Single mode 10K M
10G Direct attach SFP+ cable; Twin ax Cable ; 7M (must be compatible with HP & Cisco
switches