User's Manual

About this document
vi 913020 10.05 April 2015
D
R
A
F
T
Customer documentation
The following table lists available documents in the OneCell documentation suite.
Name Definition
Hot-swappable Hot-swappable components can be installed or removed
while the system is running, without using any software
commands.
Hot-pluggable Using the proper software commands, you can install or
remove hot-pluggable components while the system is
running.
FRU Field-replaceable units must be removed and installed only
by authorized Oracle service personnel.
CRU Customer-replaceable units can be removed and replaced by
any qualified service provider.
Table 1. Customer documentation
Title Contents
OneCell CLI Reference (913020) Describes the Switched IQ CLI commands including
parameters, syntax, and sample output.
OneCell System Troubleshooting
(913022)
Cover common troubleshooting scenarios in deployed
devices and troubleshooting methods.
OneCell Network Planning Guide
(913023)
Describes main components of the Switched IQ
system, high-level view of HW components, how do
you engineer an in-building system, how do you
determine RU locations, how to design in-building
systems and how to determine Radio Point locations.
Contains best practices for deployment, including
when to use clustering, and how to manage capacity.
OneCell Hardware Installation
and Configuration (913025)
Includes detailed installation instructions for
Controller Unit and Radio Points hardware, planning
the installation, physical install, how to configure the
installation, commissioning the installation to service;
verification tests after the installation.
OneCell Administration (913026) Contains enterprise-level monitoring and alarms.