User Manual
Table Of Contents
- Contents
- List of figures
- List of tables
- About this document
- ipBTS system overview
- Planning
- ipBTS C30 installation
- RN commissioning
- Requirements
- CLI connection
- Establishing a console connection
- Connecting the laptop to the ipBTS C30
- Downloading and activating new software
- Verifying SNTP time
- Commissioning the ipBTS C30
- Performing Loopback tests
- The loopback test process
- Backhaul loopback testing
- Ethernet loopbacks
- Looping back Ethernet backhaul links
- Looping back at the Ethernet port
- Entering diagnostic mode and configuring test parameters
- Performing external loopback tests on backhaul links
- Troubleshooting failed backhaul links
- Removing physical loopbacks
- Configuring IP on the Ethernet port and laptop
- Establishing the CLI/SSH/Ethernet connection
- Updating node software
- RN hardware components
- RN Specifications
- Hot-swapping ipBTS hardware
- Index
About this document
Related documents
3 910136 Rev01.00 Standard July 2007
Related documents
The following table lists the ipBTS C30 and ipRNC 1610 customer documentation suite.
Table 1. Related documentation
Title Contents
ipRNC 1610 Installation and
Commissioning (910135)
Describes how to install the ipRNC 1610, including mounting
the rack and setting up the backhaul network. Lists physical,
environmental, and cable specifications, and pinouts.
ipBTS C30 Installation and
Commissioning (910136)
Describes ipBTS C30 hardware features and installation.
Describes how use the CLI to run the configuration script to
commission the device.
ipBTS C30 Upgrade Procedures
R4.0.0.x to R4.0.0.y (910137)
Describes how to use the CLI to upgrade the ipBTS C30
software from R4.0.0.0.x to R4.0.0.y. Also includes rollback
procedures.
ipRNC 1610 Upgrade Procedures
R4.0.0.x to R4.0.0.y (910138)
Describes how to use the CLI to upgrade the ipRNC 1610
software from R4.0.0.0.x to R4.0.0.y. Also includes rollback
procedures.
Airvana CLI Reference for
ipRNC 1610 and ipBTS C30
(910139)
Describes all CLI commands for the ipBTS C30 and ipRNC
1610 modules. Includes command and parameter descriptions,
command syntax, and sample output for each command.
Airvana Logs Reference for
ipRNC 1610 and ipBTS C30
(910140)
Describes all log messages for the ipBTS C30 and ipRNC 1610
modules. Includes message and parameter descriptions, format,
severity, sample output, and suggested actions for each error
message.
Airvana Configuration Parameters
for ipRNC 1610 and ipBTS C30
(910141)
Describes the configurable parameters for ipRNC 1610 and
ipBTS C30. Provides parameter descriptions, SNMP values,
CLI names, and information about persistence and
intrusiveness.