User Manual

— 12 —
D
R
A
F
T
Configuring the AIRAVE router
AIRAVE contains a built-in router. Usually, you can plug AIRAVE into your broadband modem/router without
performing any additional steps. However, you may need to configure the AIRVAVE router to work with your ISP
modem or modem/router. The following table lists typical ISP setups and actions to take so that the AIRAVE router
works with your existing ISP setup.
ISP broadband
modem
LED behavior Symptom Take this action:
Cable modem Broadband and Mobile solid
green
N/A N/A
DSL modem Broadband LED slow blink
green
Cannot access internet Go to “Adding the ISP username
and password” on page 13.
DSL modem with
router
• Broadband LED solid green
• Mobile LED slow blink green
• Cannot access internet
• Cannot make a cell or VoIP
phone call through AIRAVE
Try “Changing the AIRAVE
router’s IP address” on page 15. If
the problem persists, contact
Customer Support.
Cable modem
with router
FiOS