User's Manual

104 Airvana Confidential & Proprietary, 910011: June 28, 2002
Removing access panels
This procedure explains how to remove the two required access panels in order to install the Rox System
Cabinet seal and connect all antennas.
Be sure you have read and understood Understanding the antenna installation process
on page 98 before
continuing.
Requirements
• 5/32 tamper-resistant screw driver
• Thread tapping kit with 1/4-20 thread bit at 3/4 inch depth
Procedure
1. Ensure that power is not being delivered to the IP-RN 8000.
a. Ensure the Main Power switch on the Power Distribution Unit is flipped to the right.
See Understanding the Power Distribution Unit
on page 31.
b. Ensure the external circuit breaker that controls power flow to the IP-RN 8000 is opened,
eliminating power on the IP-RN 8000 circuit.