User Manual

Chapter 3 ● Before you install
46 Release 2.0, 910056 Rev01d
Install the IP-RN 8000 following local, national, or international electrical codes:
• United States — National Fire Protection Association (NFPA70), United States National Electrical
Code.
• Canada — Canadian Electrical Code, Part 1, CSA C22.1.
• Other countries — International Electromechanical Commission (IEC) 364, Part 1 through Part 7.
Warning Definition
Product Disposal
Ultimate disposal of this product should be handled according to all national laws and regulations.
Lightning Activity Warning
Do not work on the system or connect or disconnect cables during periods of lightning activity.
Jewelry Removal Warning
Before working on equipment that is connected to power lines, remove jewelry (including rings, necklaces,
and watches). Metal objects will heat up when connected to power and ground and can cause serious burns
or weld the metal object to the terminals.
Power Supply Warning
Do not touch the power supply when the power cord is connected. Line voltages are present within the
power supply even when the power switch is off and the power cord is connected.
Power Supply Disconnection Warning
Before working on a chassis or working near power supplies, unplug the power cord on AC units;
disconnect the power at the circuit breaker on DC units.
Power Disconnection Warning
Before working on a system that has an On/Off switch, turn OFF the power and unplug the power cord.
WARNING
Warning means danger. You are in a situation that could cause
bodily injury or death. Before you work on any equipment, be
aware of the hazards involved with electrical circuitry and be
familiar with standard practices for preventing accidents.