User manual

ii
Quick Reference Guide
Function Press… Additional Information
ARM
FULL PART PERIMETER
One-Key Arming is disabled on the
Control System, enter your user
code when arming.
The default master code is 1234.
INSTANT ARM
Hold down this key
until “Instant
Arming OK?” is
displayed. Then
Press
.
Instant arming cancels the entry
delay after Part or Perimeter
arming. This feature can be enabled
by your installer.
DISARM [USER CODE] Entering your user code also
silences the siren in the event of an
alarm.
PANIC
ALARM
+ Press these buttons together and
hold them down to generate an
alarm.
FIRE
ALARM
+
MEDICAL ALARM +
MENU MODE
then [USER CODE]
Use the menu navigation buttons
(

/

) until the required menu item
is displayed then press
.
Alternatively, enter the shortcut
(e.g. 21 for Bypass Zones).
CHECK TROUBLE
CONDITIONS
Use this key scroll
the system
trouble list
Pressing

also silences any trouble
tones that may be sounded by the
system.
SWITCH PGM ON
then 30 Enter 30 for PGM.
SWITCH PGM
OFF
SERVICE CALL
+
“Dialing” is displayed. The number
dialed for the service call is
programmed by your installer.
GLOBAL
CHIME
then
Use the menu navigation buttons
(

/

) to choose enable or disable,
then press .
RECORD
MESSAGE
then After recording a message,
“Message Waiting” is displayed until
the message is played back.
The Message Center is an optional
feature that is included with certain
versions of CommPact Control
System.
PLAY
MESSAGE
then
OR
OR