User manual

3. Arming and Disarming

CommPact User Manual

Status Meaning

PERIMETER ARMED

PART ARMED INST

PERIM ARMED INST

FULL ARMING

The system is in the process of arming using the

displayed arming method (displayed during exit delay).

PART ARMING

PERIMETER ARMING

PART ARMING INST

PERI ARMING INST

The system may be programmed to display arm status at all times or only for

the first two minutes or 30 seconds after you arm or disarm the system.

In addition to arm status, the system displays messages on statuses that may prevent

you from arming your system (see the following table):

Status Meaning

ZONES IN ALARM Zones have been violated.

TAMPER ALARM The system has been tampered with.

SYSTEM NOT READY The system is not ready to arm, check that all doors and

windows are closed.

KEYPAD LOCKED Five unsuccessful attempts were made to enter a user

code; the keypad is locked for 30 minutes. If this

message appears, it is still possible to arm/disarm the

system using a keyfob. Arming is possible using a keypad

if one key arming is enabled.

SYSTEM TROUBLE

A trouble condition has been detected, press

 for

further details.

3.5. 27BArming Tones

Arming tones are the chimes that the system

sounds during the entry/exit delay and when

the system arms or disarms. Various options

are available that determine the pattern of

these tones.

Arming tones may be sounded by either the external wireless siren or the control panel’s

built-in siren.