Service manual

MECHANICAL DISASSEMBLY (Continued)
15. To remove the FPC cable assembly:
15.1 Remove the cable assembly screws.
15.2 Lift the FPC cable bracket from the
carriage.
16. To remove the carriage and guide pillar:
16.1 Remove the "E" clip from the
pillar.
16.2 Gently pry the plastic sup-
porter
from the shaft.
16.3 Slide the pillar to the right to
release it from the frame.
17. To remove the paper roller assembly:
17.1 Remove the release lever
screw and the lever assembly.
1
7.2 Release the left side roller plate
spring
from the frame plate.
17.3 Slide the roller plate to the right
to release it from the frame for
removal.
,-15.1
I
15.2
35