Service manual

----------------------~-- - -
MECHANICAL DISASSEMBLY (Continued)
12. To remove the paper roller assembly: q tl G
12.1-(1 ~
12.1 Remove the 2 paper
holding springs
from the
right and
left frames.
12.2 Remove the left liE" clip
and pull
the paper roller
axle
to enable it to slide
over the frame pins.
13. To remove the front carriage guide:
13.1 The front guide pillar is
removed by loosening
the hex
nuts at each
end. Next, slide the pillar
"from its slots in the right
and
left frame plates.
14. To remove the head shaft lever and right side frame plate:
14.1 Remove the hex nut at the right end
of the carriage pillar. Pull the lever
from the shaft.
14.2 Remove the right side roller plate
spring
from behind the paper guide.
14.3 Remove the remaining screws in the
frame plate. The frame
must slide
back,
out of the base, to be re-
moved.
FRAME
PLATE
34