Service manual

ManualsBrandsCommodore ManualsComputer equipmentMPS-802

MECHANICAL

DISASSEMBLY

(Continued)

8.

To

remove printer drive belt:

8.1 Position the carriage at the center

of

the

unit

to

allow access through the base

to

the belt holder screw. Remove

the

screw and bracket.

8.2

Remove the

liE"

clip

to

release the belt

gear assembly on the right.

8.3

The drive belt

will

be released from the

gear assembly on the

left

and can

be

removed.

9.

To

remove the sprocket frames

and

tractor assembly:

9.1 The

left

sprocket frame is

detached

by

removing the

2 frame screws.

9.2

To

remove

the

right

sprocket frame assembly,

remove the 2 frame screws.

9.3

Remove the

liE"

clips

to

release the

tractor

assem-

bly

from

the

sprocket

frames.

9.2

32