User`s manual

6: Close the boot disk and remove it from the disk drive.
NOTE To close a disk, either click on its close icon or hold down the
key and press B
7: Now copy the same printer driver to the GEOS application disk.
8: Insert the application disk into the disk drive and open it so that the
deskTop is displayed.
9: ' Follow Steps 4-5 to make the printer driver you copied to the applica-
tion disk the default printer driver.
10: Close the application disk and remove it from the disk drive.
Prinler Drivers
To find the printer driver you need, refer to the chart below. For example, if
you
own an Apple 2 Scribe, you will need to look for the Scribe driver file
on the disk. Once you have found the printer driver file you need, copy it to
the boot and application disks of the GEOS applications you purchase. If
needed, refer
to "Copying a File to Another Disk" on page 26. Once you
have copied it to these disks, use the procedure under "Activating Your
Printer" on page 60
to make it the default printer.
Your Printer Interface Printer Driver
Apple 2 Scribe
Apple ImageWriter
Apple ImageWriter
II
Blue Chip M120
BMC BX-80
Cal-Abco Legend 800
Cal-Abco Legend 808
Cannon PW-1080A
Cannon
PW-1156A
Citizen 120-D
C.Itoh 8510
C.Itoh 8510A
C.Itoh Riteman C+ NLQ
RS-232 Serial
RS-232 Serial
RS-232 Serial
Centronics Parallel
Centronics Parallel
Centronics Parallel
Centronics Parallel
Centronics Parallel
Centronics Parallel
Commodore Serial Bus
Centronics Parallel
Centronics Parallel
Commodore Serial Bus
Scribe
ImageWriter
ImageWriter
I1
BlueChip M120
BlueChip M120
BlueChip M120
Epson MX-80
Epson FX-80
Epson FX-80
MPS
1200
C.Itoh 8510
C.Itoh 8510A
Riteman C+
Those Extra Files 61