User`s manual

Expansion Unit's memory to speed up the performance of any GEOS
disk in that disk drive.
7: Select
save configuration from the file menu to install the change.
8: To exit the CONFIGURE program, select quit from the file menu.
To co$gure a RAM Expansion Unit as a disk drive:
1: Before you boot GEOS, hook up the RAM Expansion Unit to your
Commodore according to the instructions in the
REU's installation
guide.
2: Boot GEOS. Make sure you have copied the CONFIGURE program
to the GEOS DESKTOP side of the program disk.
NOTE If necessary, refer to "Copying a File to Another Disk," page
26.
3: Open the CONFIGURE program by double-clicking on its file icon.
NOTE An alternative is to highlight the CONFIGURE file icon and
select
open from the fde menu.
4: Once you open the CONFIGURE program, a screen with three dialog
boxes
- for Drives A and B and the RAM Expansion Unit - will
appear. You can configure a RAM Expansion Unit
as either Drive A or
Drive B. Go
to either the dialog box representing the disk drive you
wish to
configure for the REU and click on No Drive.
5: The disk drive's dialog box will display a list of disk drive types. If
you hooked up
a 1764 REU, click on the RAM 1541 option. If you
hooked up
a RAM 1750, click on either the RAM 1541 or RAM 1571
option.
6: Once you select a RAM disk drive type, you will be returned to the
main CONFIGURE screen. The
REU type you selected will be listed
below the
No Drive option of the disk drive dialog box you used.
7: In the RAM Expansion Unit dialog box, make sure
that the DMA for
"MoveData" and RAM Reboot options are selected (their option
The deskTop 37