User`s manual

9: To exit the CONFIGURE program, select quit from the file menu.
To add a disk drive or change Drive B:
1 : Make sure the CONFIGURE program has been copied to the GEOS
DESKTOP side of the program disk.
NOTE If necessary, refer to "Copying a File to Another Disk," page
26.
2: Open the CONFIGURE program by double-clicking on its file icon.
NOTE An alternative is to highlight the CONFIGURE file icon and
select
open from the file menu.
3: Once you open the
CONFIGURE program, a
screen with
three dialog
boxes
- for Drives A and
B and the RAM Expan-
sion Unit
- will appear.
Go
to the Drive B dialog
box and click on
No
Drive.
4:
Once you have clicked on
Use the Drive B dialog box.
No Drive, the Drive B
dialog box will display a list of disk drive options. Click on the disk
drive option you wish to
configure as Drive B.
5: Once you select a disk drive type, a dialog box will ask you to "Plug in
& turn ON new drive." Hook up the new disk drive according to the
instructions found
in its installation manual.
6: Once you have hooked up and turned on the new disk drive, click OK.
You will be returned to the main CONFIGURE screen, and the disk
drive you selected bill
be listed under the No Drive option.
NOTE If you configured Drive A as a RAM Expansion Unit, a
"shadowed" disk drive option will appear in the Drive
B dialog box.
Select this option.
A shadowed disk drive will use some of the RAM
36 The deskTop