User`s manual

3: Once you open the CONFIGURE program, the following screen will
appear:
RAM expansion: 512K
DMA for 'MoueDato'
RAM Reboot
The CONFIGURE program's main dialog box
In the above example, the currently active disk drive for Drive A is a
157 1 disk drive. Note that its box is shadowed.
4: Go to the Drive A dialog box and click on the No Drive option. A
dialog box will say "If desired, you may now turn OFF and/or unplug
drive
A." If Drive A contains your boot disk, remove the boot disk
from that drive, then turn off
andor unplug Drive A. Click OK.
5: You will be returned to the main CONFIGURE screen. The Drive A
box will now list a series of disk drive types.
6: Click on the type of disk drive you plan to use as Drive A. A dialog
box will instruct you to "Plug in
& turn ON new drive." Connect the
cables to the new disk drive according to the instructions in that disk
drive's installation manual. If the previous disk drive contained your
boot disk, insert the
boot disk into the disk drive.
7: Once the new disk drive is set up, click OK. You will be returned to
the main CONFIGURE screen. The disk drive you selected will be
listed below the
No Drive option.
8: Select save configuration from the file menu to install the change.
The deskTop 35