User`s manual

5: Next, you will be instructed to insert the destination disk into the disk
drive. After you have done so, press
-1.
NOTE If the destination disk is unformatted, the DISK COPY pro-
gram will format it first before continuing with the copy procedure.
6: Continue to follow the instructions on the screen until the disk copy
procedure is complete. It should take about three swaps of the disk.
When it is finished, you will have the option of copying another disk or
returning to the
deskTop. Press to copy another disk or to return
to the deskTop.
7: Use the rename command from the disk menu to rename the destina-
tion disk.
IMPORTANT To avoid confusion, never give two disks the same
name.
To copy a disk using two disk drives or one disk drive and a RAM Expan-
sion Unit:
1: Open the source disk by inserting it into a disk drive and clicking on
that disk drive's icon.
2: Select copy from the disk menu. A dialog box will prompt you to
insert the destination disk into the other disk drive.
3: Insert the destination disk into the other disk drive and click OK.
NOTE If "the other disk drive" is a RAM Expansion Unit, this
procedure will copy the current disk contents to the
REU. If you have
an REU, just click
OK.
4: The message "Replace the contents of (destination disk name) with the
contents of (source disk name)?" will appear. Click
YES to continue.
After a few moments, the contents of the source disk will be copied
onto the destination disk.
NOTE You can copy a disk in Drive A to Drive B and vice versa.
The deskTop 31