User`s manual

Renaming a Disk
You can use spaces and punctuation in the names of your disks, if desired.
You can have up to 16 characters in a disk name.
To rename the currently open disk:
1:
Select rename from the disk menu.
2: A dialog box will ask you to "lease enter new disk name." Backspace
over the current name
as much as you need, type in a new name, and
press
-1.
NOTE Do not give disks the same name, since this may cause CO~~U-
sion.
Copying a Disk
The methods for copying a disk vary, depending on whether you have one
disk drive or two. Note
that the RAM Expansion Unit is treated as a disk
drive. The source disk is the disk whose contents you wish to copy; the
destination disk is the disk onto which you wish to copy those contents.
NOTE You cannot copy a boot disk.
To copy a disk using one disk drive:
1: Insert the source disk into the disk drive and close the disk drive door.
2: Open the source disk, either by clicking on its disk drive icon on the
deskTop or by holding down and pressing the letter 0.
3: Open the DISK COPY utility program, Look for
either by doubleclicking on its icon or
1 his file icon
highlighting its icon and selecting open
DISK COPV on the deskTop.
from the file menu.
NOTE The DISK COPY utility program is located on the GEOS
ADDTL side of the program disk.
4: The screen will turn blue and a message will instruct you to insert the
disk
to be copied into the disk drive. Insert the source disk and press
-1.
30 The deskTop