User`s manual
Exiting
GEOS
Never turn off your computer until you have properly closed a program, or
damage to your files may occur. Use the following procedures to exit
GEOS. You can turn off your computer entirely, or you can exit to BASIC
mode from the
deskTop, if desired.
Ifyou wish to turn off the computer:
1:
Exit the current program and return to the deskTop.
2:
Position the pointer over the close icon in the
Click here
upper right corner of the disk note pad and click.
to close the
disk.
The file icons on the disk note pad will disappear
and the disk drive icon representing the disk
drive containing the
program
disk will appear
with a question mark inside.
3: Remove the program disk from the disk drive and store the program
disk in a safe place.
4: Turn off the computer, disk drive, and monitor switches.
If you wish to return to
BASIC
mode:
1:
Exit the current program and return to the deskTop.
2:
Go to the command menu and click on the special menu item.
3:
Clicking on special will display two items:
BASIC
and
RESET.
Click on
BASIC.
You will
be
returned to the original
64
BASIC mode.
NOTE
If you wish to return to GEOS at this point, you can do so by
pressing the
-1
key.
4: Remove the program disk from the disk drive and store the program
disk
in
a safe place.
6
Welcome to
GEOS