User`s manual
Running the Demonstration Program
After you have loaded GEOS and have your input device working, you will
be ready
to
run the GEOS demonstration program. (You will also get a
quick lesson in using an input device,
if
you don't already know how.)
Once you begin the GEOS demonstration program, it will continue until it
completes its performance, then return you
to
the deskTop afterwards. You
can interrupt the program at any time.
Ifyou wish to: Do the following:
Move
to
the next dialog box
Press the spacebar
S top a screen
Hold down
and press
Continue after stopping
Hold down
and press
Exit
to
deskTop
Hold down and press
To open the demonstration program:
1:
Use the input device to move the pointer on the screen. For example, if
you have a joystick, move its handle in the direction you want the
pointer to go.
2:
Move the pointer
so
that it is positioned over the GEOS DEMO file
icon.
3:
When the pointer is positioned over the icon, press the input device
button.
(If you
are
using a mouse, press the left button.) This is called
"clicking." The GEOS DEMO file icon will appear in reverse video.
4
Welcome
to
GEOS