User`s manual

Appendix B
Note: The following errors can show up during nonna! program operation:
Disk error!
During disk access an error has occurred. The me in which the error occurred
will be shown, as well as an error number. The error numbers, together with
their meaning, are listed below. Unlisted numbers suggest either structural,
mechanical or magnetic damage to the disk.
o Meaningless
3,1 Not enough space on the disk
4 Too many files on the disk
5 File not found
13 Device not present
38 Disk is write-protected
File not found
The selected file can not be found. This error occurs when no file is chosen
from the file selection box.
Too many fonts on dlskl
Reduce the number of fonts on the disk. The Print System is only able to
cope with a certain number of fonts and point sizes. geoWrite can only
manage seven external fonts at a time anyhow.
Error while reading fonts
A disk error has occurred while reading a font. The error number is described
under Disk errors!
Font too large!
The font is larger than 14,500 bytes.
Printer Inaccessible!
The serial connected printer is either not turned on or is disconnected. Check
your switches and cables.
Line buffer overflow I
This error may occur when using extremely small fonts and high print
resolution.
Reduce the resolution a bit
Internal error!
This indicates an error in the Print System itself which cannot be displayed.
60