User`s manual
The
GEOS
LQ
Print
System
1.5.
;
Distance,
in
inches,
between
footer
and
;
edge
of
paper
This distance can be made larger or smaller by inserting an inch value.
Yes
;
Perform
form-feed?
If
the Print System is to perform a formfeed after every page, a "yes" is
required here. A
"no"
will cause the pages to print without a formfeed.
No
;
Use
GEOS
LQ's
software
form-feed?
With
"No"
here the system just sends a form feed command
to
the printer,
so the printer has to know the right form length (you
may
modify that
setting with DIP switches on most printers). "Yes" tells the Print System
to perform the
form
feed itself. So a "Yes" here allows you to
use
any
form
length you want, independent from the printer. This is helpful when
printing labels,
as
the page length can easily be adjusted
by
just altering the
value below (see "LQP Labels").
11
;
(0.0-255.99)
Page
length
in
inches
This value determines the page length in inches. This is important for
setting the bottom line and for the
form
feed
if
the previous value is set at
"yes".
Other
;**Other
80
('0-639)
Additional
left
margin
for
narrow
text
(V1.0-2.0)
o
(0-639)
Additional
left
margin
for
full-width
text·
(V2.1)
Both
of
these values regulate,
in
pixels, the left margin for the printout. The
first value is for narrow documents, the second
for
those in which "make
full page wide"
in
geoWrite
has
been chosen.
Yes
;
Blank
screen
while
printing?
If
you're
bored
with a blank screen during printing,
then
insert
"no"
here. In
40 column mode you
will
then see the system work. This slightly prolongs
the printing with GEOS 64. With
"No"
here, on
GEOS
128 the 2 MHz
mode will not be used when printing.
37