User`s manual

Section 4
If you are the fortunate owner of an LQ-550 or a new LQ-850/860 (or
1050/2550) you can use the nLQA NEW Epson Q" fIle. This adaptation
functions only with these newer Epson printers. The nLQA Epson Q" will
also work with all these printers.
24 pin Printers, IBM-compatible
A few 24 pin printers are mM-compatible (usually very old 24 pin printers).
Use the "LQA mM 24" adaptation fIle in these cases. Many new 24 pin
printers can be switched to mM mode. This will, however, normally bring
disadvantages to the C-64/128 user.
Problems which may occur
If the printout is horizontally ragged, make sure that the condensed print
mode on your printer is switched off.
If an exotic 9 pin printer neither functions without adaptation nor with
"LQA ffiM" then try out the "LQA Oldmechanic" and the "LQA Epson
Half' (half<ompatible) fIles.
If you are unable to produce quality results with this software, or are unable
to get your printer to work with this package, please contact CMD
Technical support for help. Let us know the exact printer make and type,
and how the printer is connected to your computer (serial, parallel, interface,
etc.).
You might also supply us with some sample printouts, if possible.
We will try to solve the problem, b~t we may require a copy of your printer
and/or interface manual(s) if the printer and/or interface are less,common.
Optional Parameter Files
Besides the connection and adaptation fIles you can also install a parameter
fIle on to your work disk. This fIle can be changed within geoWrite to alter
the page size, enlarge or reduce the whole document, etc. More on this in
Section 4, topic "The Configuration Files". The default parameter flle is
"LQP Standard" located on page 5 of the deskTop.
Using. the GEOS LQ Print System
The Print System is very user-friendly. The information contained in this
section may help you better understand some of the options available.
26