Instructions

4
Long press for 3s; the indicator light on the robot comes
on, connect the robot to the charging dock for charging.
Installation Instructions
1. Connect the power cord, and collect the redundant cable.
* Please ensure a space of at least 0.5m on both the left and right
sides of the charging dock, and a space of at least 1.5m in front of it;
* Do not expose the charging dock to direct sunlight.
more than 0.5m
more than 1.5m
more than 0.5m
3. Startup and charge.
Blue light remains on: Startup finished / working normally
/ charging finished
Yellow light breathes: Charging
Red light blinks: Abnormal state
* Please put the redundant cable into the cable slot at the bottom
of the charging dock, otherwise the cable may be dragged and
disconnect power supply to the charging dock.
*In case of low battery , it is possible that the robot cannot start up
or shut down. Please directly connect the robot to the charging dock.
* The robot will start up automatically after connection to the charging dock.
* The robot cannot shut down while it is connected to the charging dock.
2. Place the charging sock against a wall, and connect the power
supply.
15
Inbetriebnahme
5. Drücken Sie die Powertaste für ca. 3 Sekunden.
6. Stellen Sie den Saugroboter vor die Ladestation.
7. Drücken Sie die Rückkehr-Taste, der Saugroboter fährt
automatisch auf die Ladestation.
HINWEIS!
Während des Ladevorgangs
pulsiert die Beleuchtung der
Powertaste langsam gelb.
• Sie können den Saugroboter nach dem Einschalten auch
direkt auf die Ladestation stellen.