Instructions

57ENGLISH
Startup
Setting the time
1. Point the remote control at the switched-on Robot Vacuum
Cleaner.
2. Hold down the
button on the remote control for about 2
seconds until the hour display ashes.
3. Use the buttons
and to select the current time. Use the
buttons
and to switch between minutes and hours.
4. Use the
button to save the stored time.
NOTE!
• The Robot Vacuum Cleaner will conrm that the time has
been saved with an acoustic signal.
• Proceed as follows to connect the remote control to the
Robot Vacuum Cleaner:
1. Press the
button for about 5 seconds.
2. While the connection is being established, the remote
control will display "8888".
3. The time will be displayed again as soon as the connec
-
tion has been established.
• If the connection attempt is unsuccessful for 30 seconds, the
display will continue to show “8888”.
• Ensure that the Robot Vacuum Cleaner is switched on before
you try to pair it with the remote control.