Specifications

Loading and
Running Software
in CP/M Mode
Before you can load a software program in CP/M mode, you must
first load the CP/M 3.0 operating system itself. To do this you load a
copy of the CP/M 3.0 system from the CP/M System disk into the
computer's memory, using this procedure:
1. Make sure the computer is
OFF.
2. Make sure that you are using
the proper type of monitor. If
you are using a dual monitor
like the Commodore 1902.
make sure the video mode is
set properly.
3. Make sure that the 40/80 key
on the computer keyboard is
set to the column width you
want. In most cases this will
be 80 columns, so the 40/80
key should be depressed.
4. Turn the computer ON. Then
insert the CP/M 3.0 System
disk into.the drive.
5. Type "BOOT" this automati
cally loads CP/M 3.0 into the
computer's memory. This pro
cess is called "booting/1 This
is what the screen looks like
during the booting process.
32