Instruction manual

1541/1571 DRIVE ALIGNMENT
for
The Commodore 641128 Computer
f(om
Free Spirit Software &
[BSD] Software
Instruction Manual by
Mark Brannon
The 1541/1571 Drive Alignment System Is a precision alignment progrlJfll
that will return your disk drive to better than new alignment,
The Alignment System will automatically evaluate the alignment
condition of your
drive and provide you with the necossary Information
to realign your
drive, with friendly 'on-screen' help available at all times
The Alignment system Is'designed to operate with the C-128, 1280, (in
either 64 or 128 mode), the C-64 (& C-64C), and the SX-64 computer, The
Alignment System 'will work with the following disk drives:
1) 1541 and 1541C drive
2) 1571 drive
3) SX-64 drive
4) Commodore compatible drives
Program loading:
For the C-128 computer, simply Insert the Alignment disk, (program~ side
up) in the disk drive and reset or turn on the computer,
For the C-64, type LOAD"*",8 then press (RETURN), Then type HUN
[RETURN),
For the SX-64, press [C c:] and (RUN/STOP) simultaneously. .
For multiple drive systems, If drive number 81s so badly out at alignment
that
It will not load a program, type LOAD "AUGNMENT 64",9,1 for the
C-64 or RUN "ALIGNMENT 128",U9 for the C-128,
For single drive systems that drive number 81s so badly out of alignment
that
it will not load a program, see notes on Loading with a mill-aligned
drive,
Does my drive need allgnment7
If your disk drive chatters or bangs or the DRIVE ACTIVE light continue~
to flash rapidly during UN·PROTECTED program loads, or programs fail to
load at all, or If It has difficulty writing files to a disk, chances ,re It Is In
need of alignment