User manual

11
User manual CIBS Office 1g
NO
EN
NO
EN
12
User manual CIBS Office 1g
NO
EN
NO
EN
Lift the handset from your telephone. -
You will then hear the call through the telephone handset. -
Through neck loop (Blues II)•
Make sure that Tango VII is lit on the volume indicator for -
Blues II
16
c. If not, press the the selector for Blues II
13
.
Press the answer button -
1
.
Lift the handset from your telephone. -
You will then hear the call in Blues II. -
Note! By using a handset lifter (optional), you will hear the ring -
signal directly in the neck loop, and you can easily answer the
call by pressing the answer button
1
. Then you do not need to
lift the handset.
end a telephone call (Tango VII) …
Through the telephone handset•
Replace the handset of your telephone. -
Through neck loop (Blues II)•
Replace the handset of your telephone. -
Press the answer button -
1
.
Note! By using a handset lifter (optional), you will be able to -
close the call by pressing the answer button
1
. Then you do not
need to replace the handset.
make a call from your desk phone (Tango VII) …
Through the telephone handset•
Make sure that Tango VII is lit for the volume indicator for the -
telephone handset
14
c. If not, press the selector for telephone
handset
11
.
Lift the handset of your telephone, and dial the desired -
telephone number.
You will then hear the call through the telephone handset. -
Through neck loop (Blues II)•
Make sure that Tango VII is lit on the volume indicator for -
Blues II
16
c. If not, press the the selector for Blues II
13
.
Press the answer button -
1
.
Lift the handset of your telephone, and dial the desired -
telephone number.
You will then hear the call in Blues II. -
Note! By using a handset lifter (optional), the handset lifter will -
automatically lift the handset when you press the
answer button
1
. Then you do not need to lift the handset.
How to...
adjust the volume (Blues II) …
The volume can be adjusted gradually (press once for each volume •
level) or by pressing the volume button
8
in the desired direction
until the desired volume has been reached.
You will hear a signal when the volume has reached the highest or •
lowest level.
The Blues II remembers its last volume position, so that when •
switched off and on it will start at the same volume position.
adjust the volume (Tango VII) …
For the telephone handset•
Make sure that Tango VII is lit on the volume indicator for the -
telephone handset
14
c. If not, press the selector for telephone
handset
11
Adjust the volume by pressing the volume control for the -
telephone handset
14
a/b
You will see the sound level in the volume indicator for the -
telephone handset
14
c.
For the neck loop (Blues II)•
Make sure that Tango VII is lit on the volume indicator for -
Blues II
16
c. If not, press the selector for Blues II
13
Adjust the volume by pressing the volume control for -
Blues II
16
a/b
You will see the sound level in the volume indicator for -
Blues II
16
c.
adjust the tone level (Tango VII) …
For the telephone handset•
Make sure that Tango VII is lit for the volume indicator for the -
telephone handset
14
c. If not, press the selector for telephone
handset
11
Adjust the tone level by pressing the tone adjustment -
for the telephone handset
15
For the neck loop (Blues II)•
Make sure that Tango VII is lit on the volume indicator for -
Blues II
16
c. If not, press the selector for Blues II
13
Adjust the tone level by pressing the tone adjustment -
for Blues II
17
answer a telephone call (Tango VII) …
Through the telephone handset•
Make sure that Tango VII is lit for the volume indicator for the -
telephone handset
14
c. If not, press the selector for telephone
handset
11