Installation Guide

7 HOMEDEPOT.COM

Please contact 1-844-548-3776 for further assistance.

Installation (continued)

Installing the mounting base

Junction Box

□ Route the junction box wires through the large center hole

in the mounting base (D).

□ Align the holes on the mounting base (D) with the holes on

your junction box. Use two (2) or four (4) #8 screws (AA),

depending on the size of the holes in your junction box, to

attach the mounting base (D) to your junction box. (Fig. 1)

Surface Conduit Mount

□ Mark and drill two to four holes on the wall surface as per

the desired location for installing the mounting base (D).

□ Use two or more suitable screws (not included) applicable

to the surface of mounting and attach the mounting base

(D) on the surface. (Fig. 2)

Fig. 1

Fig. 2