Installation Guide

5 HOMEDEPOT.COM
Please contact 1-844-548-3776 for further assistance.
Preparing for Installation
□ The xture can be mounted in the following two ways:
□ Junction Box Mount: Use a junction box to mount the
xture.
□ Surface Conduit Mount: The xture can also be
mounted directly on the wall surface using conduit entry.
□ To ensure proper dusk-to-dawn operation, ensure the
photocell is oriented at the top for a wall mount installation,
in an area that receives daylight. Do not place too close to
reective surfaces.
□ When installing two xtures on one switch, make sure the
switch is rated for at least a 1A inductive load.
□ If dimming, use with 0-10V dimming switch.
NOTE: The mounting base (D) mounts to recessed mounted
standard junction boxes or to the surface directly. Junction
box must be at least 1-1/2 in. in depth for proper installation
for a recessed mount application.
1-1/2"
Wall Mount
1-1/2"
Round
Octagonal/Square
Installation
1
Turning off the electricity
□ Verify the wall switch is in the OFF position.
□ Turn OFF power at the circuit breaker that supplies power
to the outlet box you are working on.
□ For screw-in type fuses unscrew the fuse that supplies
power to the outlet box you are working on.