Installation Guide

10
Care and Cleaning
□ Shut off the main power supply before cleaning the product. To prolong the original appearance, clean the light xture with clear water
and a soft, damp cloth only.
□ Do not use abrasive cleaners or cleaners that contain alcohol. Do not apply paints, solvents, or any other chemicals on this light xture.
They could cause a premature deterioration of the nish and may void the warranty.
□ Do not spray the light xture with a hose or power washer.
Troubleshooting
If the light does not come on:
□ Verify that the power is turned ON from the circuit breaker and wall switch.
□ Verify the wiring for the xture is done properly.
□ Verify the line voltage is correct.
If the light ickers:
□ Do not wire to a dimming switch, use a standard ON/OFF switch.