Use and Care Manual

(fig 10).
Remove the conduit entry knock-out (B)
on the sides of the light fixture (A).
Thread the wires through the conduit entry
on the mounting plate (F) as shown in fig
10. Secure the conduit to the mounting
plate (F) and make wire connections as
shown in fig 10
.
Hang light fixture (A) on mounting plate (F).
Tighten the mounting plate tightening
screw (C) to secure light fixture to the
mounting plate (F).
WHEN USING SIDE CONDUIT ENTRIES
(No junction box present)
Installation (continued)
9
HOMEDEPOT.com
Please contact 1-877-527-0313 for further assistance.
F
A
B
C
CC
☐
☐
☐
☐