Use and Care Manual

(fig 13).
Once electrical connections are complete,
push wires and connections into the junction
box and hang the fixture by attaching the
back of the fixture to the mounting plate (F).
Tighten the one mounting plate tightening screw (C)
to secure fixture to the mounting plate (F). (fig. 13)
Installation (continued)
5
Mounting the Light Fixture
6
Caulking Around the
Light Fixture
NOTE: Failure to properly caulk around the
back face of the light fixture and mounting
surface could lead to water damage and is not
covered under warranty.
NOTE: When attaching this light fixture to an
extruded surface mount junction box, caulk
between the junction box and the mounting plate.
Caulk around the back face of the light fixture
as shown in fig 14 with silicone sealant (not
included).
(fig 14).
11
HOMEDEPOT.com
Please contact 1-877-527-0313 for further assistance.
F
C
CC
☐
☐
☐