Installation Guide
8
Operation
SELECTING DUSK-TO-DAWN OR SWITCH-ACTIVATED CONTROL
Option 1: Dusk-to-Dawn Operation
Dusk-to-dawn operation enables the light xture to
automatically turn ON when dark outside and turn OFF
when the sun rises, thus saving you energy.
□ To enable dusk-to-dawn operation remove
temporary black cover label (DD) from
the photocell (B) and conrm that it is
unobstructed.
□ Ensure the switch powering the outlet
connected to the light xture is turned to the
ON position and leave it ON at all times to
enable dusk-to-dawn functionality to operate
automatically.
IMPORTANT: To test if the light xture (A) and photocell
(B) works properly run power to the xture and cover the
photocell with the cover label (DD) to turn the xture ON.
Shine a light into the photocell to see if xture turns OFF.
NOTE: If the photocell (B) is located in an area under
heavy shade the photocell may not detect enough light and
may turn the light xture on.
B
A
DD
Option 2: Switch controlled
Switch controlled operation enables the light xture to
turn ON and OFF by ipping a switch that controls the
electricity to the outlet powering the xture. The light
xture will not turn ON and OFF automatically, but is
manually controlled.
□ To enable switch activated operation, put
the photocell black cover label (DD) on the
photocell (B) window.
B
A
DD
Care and Cleaning
□ Shut off the main power supply before cleaning the product. To prolong the original appearance, clean the
light xture with clear water and a soft, damp cloth only.
□ Do not use abrasive cleaners or cleaners that contain alcohol. Do not apply paints, solvents, or any other
chemicals on this light xture. They could cause a premature deterioration of the nish and may void the
warranty.
□ Do not spray the light xture with a hose or power washer.