Installation Guide

2
2. Attach the S hook at the bottom of the mounting chain (AA)
to the hanger on the shop light (A). Repeat this step on the
other side of the xture. Then close all hooks with pliers to
secure them.
Chain
Cable tie
(not included)
3. Hang the shop light (A) by placing one chain (AA) over each
hook (CC) that has been installed on the ceiling.
4. Adjust chains to level light. The xture must hang at least 3 in.
from the ceiling.
5. Plug the electrical plug adapter into an electrical outlet.
6. Pull the chain down to turn the light on and off.
CAUTION: When suspension mounting, make sure the
light xture is located directly below the electrical outlet.
Excess cord should be secured to the mounting chain (AA)
with the cable tie (not included).
LIGHT DISTRIBUTION
-90
-120
-150
-/+180
150
120
90
60
30
-60
-30
0
AVERAGE BEAM ANGLE(50%):113.2 DEG
C0/180,109.7
C30/210,119.3
C60/240,114.0
C90/270,109.7
UNIT:cd
0
30 0
60 0
90 0
1200
1500
Hanger
AA
A
CC
AA
A