Manualshelf

Installation Guide

ManualsBrandsCommercial Electric ManualsCommercial Lighting40 in. 64-Watt Equivalent Black Brushed Nickel PIR Motion Sensor LED Shop Light Linkable with Motion Timer 3000 Lumens
12345678
2
2. Attach the S hook at the bottom of the mounting chain (AA)
to the hanger on the shop light (A). Repeat this step on the
other side of the fixture. Then close all hooks with pliers to
secure them.
5. Plug one end of the power cord/linking cable (C) into the receptacle at the end of the shop light (A). Insert the other end of
the power cord/linking cable (C) into the electrical plug adapter (B), and then plug the electrical plug adapter (B) into an
electrical outlet.
6. Plug the plug end of the power cord into the AC120V, 60Hz socket, turn on the switch of the lamp body, and it will work normally.
3. Hang the shop light (A) by placing one chain (AA) over each hook screw (CC) that has been installed on the ceiling.
4. Adjust chains to level light. The fixture must hang at least 3 in. from the ceiling.
-
o
C
B
AA
A
AA
A
Hanger
CC
AA
A
CAUTION: When suspension mounting, make sure the light fixture is located directly below the electrical outlet.
Excess cord should be secured to the mounting chain (AA) with the cable tie (DD).
AC 120V
60Hz
AA
DD
A
-
o