Instructions / Assembly

Page 14
SET UP & USE
12. Turn over the bottom hinge bracket so the flat
edge is facing the outer left side of the unit.
Reinstall the pin, nut and washer into the bracket.
Re-Insert the leg in the front hole of the bracket
and the leg in the middle hole.
13. Align the door to the cabinet and secure it with
the bottom hinge pin and bracket by inserting
the 4 screws into the holes. Tighten the screws.
Make sure the leg is tightened in the front hole of
the bracket.
14. Align the bottom door and the cabinet. Reinstall the bottom door with the lower
hinge bracket. Tighten the screws. Make sure the legs are tightened.
15. Reinstall the middle hinge. Insert the hinge pin on the top of the lower door and
reinstall using the 2 previously removed screws.
16. Insert the top refrigerator door onto the hinge pin of the middle hinge. Reinstall
the top hinge bracket with the 3 previously removed screws.
17. Make sure the top of the door is aligned with the cabinet and provides a tight seal
with the gasket before tightening screws.
Install the top hinge cover by aligning the back of the cover first and pushing
down.
DOOR ALIGNMENT
If either door is not aligned properly and does not provide a tight seal with the
gasket, loosen the screws on the hinges on top of the door. Reposition the door and
retighten all the screws.