Instructions / Assembly

ENGLISH
Page 11
SET UP & USE
5. Choose a MOUNTING OPTION (Shown on page 7):
FLUSH INSTALLATION OPTION
If installing ush, remove the screws from the canopy and reinstall 3 screws to attach
the canopy to the motor housing as shown.
Complete the wiring as shown on page 14. It will require two people to complete this
installation. Someone will need to hold the canopy and motor housing, while the wires
are being connected.
NORMAL DOWNROD OPTION
6. Remove clamp pin (1) and cross pin (2) from
downrod (3). Proceed to DOWNROD
INSTALLATION page 12, step 7.
1
2
3
Screws
Motor
Housing
Canopy