Full Product Manual

Page 9
3. Connecting gas hose to Pizza Oven.
Please note the factory setting that the hose has been assembled to the Pizza Oven.
This gas fitting is clockwise. Make sure that the tank is completely switched o and
screw the regulator as far as possible into the gas tank valve.
CONNECTING THE LIQUID PROPANE GAS CYLINDER
1. The cylinder valve should be in OFF position.
2. Make sure the burner valve is in OFF position.
3. Inspect the valve connections, port and regulator assembly. Remove debris and
inspect the hose for damage.
4. When connecting the regulator assembly to the valve, use your hand to tighten
the nut clockwise until it stops.
Use of a wrench could damage the quick coupling nut and result in a hazardous
situation.
5. Open the cylinder valve fully by turning the valve counterclockwise.
6. Before lighting the oven, use a soap and water solution to check all connections
for leaks.
7. If a leak is found, turn the cylinder valve OFF, and do not use the oven until local
liquid propane dealer can make repairs.
SET UP & USE
4. Connecting to gas tank.
WARNING:
Please always keep the gas bottle in upright position.
The size for 20 lbs LP gas cylinder is 12.2 inches in diameter and 17.9 inches tall.
If the appliance is not in use, the gas must be turned o at the supply cylinder.
The cylinder used must include a collar to protect the cylinder valve.
The minimum distance for the appliance and the 20 lb. gas tank is 3 feet apart.