Product: MICROWAVE SENSOR Model: EZ-HS301 OEM/Integrators Installation Manual COMMAX Co.,Ltd.
1. Scope of application This product is applied to Commax front door controller. 2. Overview This product has a built-in MCU CONTROLLER and uses DC 5V. It is used as input power and the output is 0V when there is no detection. If it is 5V. 3. Electrical characteristics 3.1 Rated Input Voltage: DC5V 3.2 Input Maximum Voltage Range: DC 4.8 – 5.2 Vdc 3.3 output voltage: DC 0-5V 4. Detection distance, (may show slight distance depending on environment) 4.1 Distance: About 1.5 ~ 2M 4.
6. Dimensions and connector 1) 36mm x 20mm x 1.0T 2) V: 5V // G: 0V // I: Controller output terminal 7. Features of the product 7.1 Unaffected by environmental factors such as dust, light, noise and temperature. 7.2 Non-metallic structures (plastics, curtains, barriers, office partitions, glass, plywood, etc.) penetrate through and detect the movement of objects on the opposite side. 8. Environmental conditions 8.1 Operating Temperature: -20 ~ 60 ℃ 8.
Federal Communication Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
IC Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1)this device may not cause interference, and (2)this device must accept any interference, including interference that may causeundesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
