User`s guide

ManualsBrandsCommax ManualsHome building and DecorDRC-MSC

a513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea

Int’l Business Dept. : Tel.; +82-31-7393-540~550 Fax.; +82-31-745-2133

Web site : www.commax.com

Printed In Korea/ 2007.12

• Thank you for purchasing our COMMAX product.

• Please carefully read this User’s Guide (in particular, precautions for safety)

before using the product and follow the instructions to use your productexactly.

• The company is not responsible for any safety accidents caused in abnormal oper-

ation of the product.

Model No. DRC-MSC/MSB

MULTI

ENTRY UNIT

Summary of content (10 pages)

PAGE 1
MULTI ENTRY UNIT Model No. DRC- MSC / MSB • Thank you for purchasing our COMMAX product. • Please carefully read this User’s Guide (in particular, precautions for safety) before using the product and follow the instructions to use your productexactly. • The company is not responsible for any safety accidents caused in abnormal operation of the product. a513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea Int’l Business Dept. : Tel.; +82-31-7393-540~550 Fax.
PAGE 2
3)System diagram CH2 13. Specification Item Wiring Power voltage Transmission Method Screen dimension Content(DRC-MSC/MSB) To Build Distributor: 8-wire(talk 2, Data 2, Video 2, Power 2) DC24~DC28V 5A ( powered by building distributor) Duplex System 128x64 GRAPHIC LCD Power requirement Standby : 60mA Maximum operation: 450mA(Max.) Distance range (to Build Distributor ) When power source is supplied from Building Distributor. Less than 20m When power source is supplied separately.
PAGE 3
Table of Contents 2) Wiring - Please pay attention to the polarity of the wires. Units will not work properly when mis-wired - When using a UTP(CAT.5) cable, be sure to check the connection of the color of the wires as shown in the picture above. Warnings and caution 2 - Within 20m between Build Distributor and Multi Entry Panel, the power is supplied from the Building Distributor.
PAGE 4
Warnings and caution ◎ Make sure to follow the instructions to prevent any danger or property losses. It indicates prohibition. Warning It indicates prohibition of disassembly. Death or serious injury is expected. It indicates prohibition of contact. It indicates dos and don’ts. It indicates that the plug should be pulled out from the socket. Warning Do not put the plug in the socket simultaneously. It may generate abnormal heat or cause a fire. Do not connect to other products while in use.
PAGE 5
Warnings and caution It indicates prohibition. Caution It indicates prohibition of disassembly. An injury or property losses are expected It indicates prohibition of contact. It indicates dos and don’ts. It indicates that the plug should be pulled out from the socket. Caution 12) “Completed sending” message is displayed as above, select (Y). (When “LOBBY Not connected” message is displayed, please recheck the cable connection, the Dip switches of the Building Distributor and “Select No.
PAGE 6
1. Features 8) Enter a resident number and name and then select “ OK ” to enter the next resident number and name. (can be entered up to 200 resident numbers and names) 1) Wiring : 8 wires when including a power source ~ Simple installation - all wiring can be used with UTP cable(CAT.
PAGE 7
3) Set the dip switches of Building Distributor to match its assigned ID. 4) Run “NAME TOOL_200.exe” file. 8) Screen display duration lasts for 30 seconds after receiving a call 9) Talking duration time last for 60 seconds. 10) Temperature limit : -10℃ ~ +40℃ 11) Dimension(mm) : 140(W) x 341(H) x44(D) 12) Weight: 1570g 5) Select the Building ID in “ Select No ”. on the menu.
PAGE 8
11. Connectable Products 2. Part names and Functions 1) Building Distributor(CCU-BS) : one Building Distributor is connected to up to 4 Multi Entry Panels , Outside Distributor, Floor distributor and Audio type guard station unit. (Building Serial Numbers are allocated to each Buildings Distributor by its Dip Switch ) 2) The Floor Distributor(CCU-FS) : one Floor Distributor can connect to up to 4 residences on each floor. 3) In-house unit: master unit can connect to up to 2 Sub-units per residence.
PAGE 9
10. Changing the password 3. Calling In-house unite by resident Number 1) Changing Resident Password 1. Hold “Residence Number” and “Key button for 2 seconds and release when LCD stops blinking. 2. Enter “Current password“ 3. Hold “Key 1) Press the buttons according to the residence number and then Press “ ” 2) After the residence answers, you can talk with the in-house unit.
PAGE 10
6. Open the entrance with PIN Number 1. Opening the common entrance with Household Number Note : The doors do not open by default password “ 1234 ” Only after changing default Password to new one, can you use this function. 1) Press resident number” and “KEY button 2) Press PIN number and the “KEY button The door opens with the “OPEN” message display on the LCD screen. 2. Opening the common entrance with PIN Number 1)Enter the number sequence, “9900”. 8.