User Manual VIDEO PHONE CAMERA DRC-40BS/40CS • Thank you for purchasing COMMAX products. • Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow instructions to use a product exactly. • The company is not responsible for any safety accidents caused by abnormal operation of the product.
Contents 1. Introdution..................................................... 3 2. Important Safeguard ..................................... 4 3. Part Names................................................... 4 4. Wiring and Installation .................................. 5 5. Package contents ......................................... 7 6. Specification ................................................
1. Introdution Your unit is designed so it can be flush mounted on the or used. When flush mounted on the wall, the stand permils you to the unit for an gular of unit view. The model number is located on the bottom and record the serial number in the space provided below(available). Refer to these numbers whenever you call upon your COMMAX dealer regarding this product. Model No. Serial No. To prevent fire or shock hazard, do not expose the unit to rain or moisture.
2. Important Safeguard ▲ Damage Requiring Service: This equipment from the power source and source and refer servicing to qualified service personnel under the following conditions: ⓐ when the power is damaged. ⓑ if liquid has been spiled or objects have hallen into the unit ⓒ if the equipment has been exposed to rain or water. ⓓ if the equipment has beem dropped or otherwise damaged. ⓔ when the equipment exhibits a distinct change in performance- this indicates a need for service.
3. Part Names. =8 ᮃ 5 1 2 3 10 4 8 11 47?-: =88-: ڹ ں ڼ 7 12 9 6 1. Protection shield. 2. Lamp at night 3. C.C.D Camera Lens 4. Speaker 5. MIC. 6. Call button. ڻ 7. Monitor Connection terminal. 8. Description Label. 9. Bracket mounting a wall 10. Angle adjustment lever. 11. Power lamp : When talking with a monitor, it is on. 12.
4. W iring and Installation UP ᮃ ;+:-? < Ŧ UU ;+:-? 5 Ŧ UU KU KU 1. Fix a bracket to wall with screws (M3 x 10mm) supplied. 2. Please fix the desired angle of a lens with angle adjustment lever before fixing it. 3. Put a camera unit into a bracket. A Monitor A door camera unit 4. Recheck the desired position of a camera unit to be installed through the image of a monitor.
< Ŧ UU ;+:-? 5 Ŧ UU A Monitor KU KU 60cm 6 A door camera unit
5. Package contents 1. SCREW : T4X18mm 2EA, M3X10mm 1EA 2. Manual 6. Specification Spec. Model Pick Up Device Wiring (House/Door Releasa) Related voltage Conversation Method Video Transmission Standard Angle Adjustment Min. Illumination Temperature Dimension weight DRC-40BS DRC-40CS B/W C.C.D 1/3” COLOR C.C.D 1/4” 4 wires in Polarity / 2 wires in NonPolarity 12V (from a mointor) Simultaneous Conversation EIA or CCIR NTSC or PAL H : 68ŊV : 50Ŋ H : 68ŊV : 50Ŋ 0 LUX(300mm from Camera) -10Ű ~ +40Ű 99.
Memo 8
513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea Int’l Business Dept. : Tel.; +82-31-7393-540~550 Fax.; +82-31-745-2133 Web site : www.commax.com PM1040BS0010 Printed In Korea / 2011.09.
