User's Manual

6.1.3. Burglar sensor settings
burglar sensor settings on
burglar sensor settings off
※ This function will be activated when the security devices have been installed.
※ You can set the using security sensors in ‘Setting>Connections COMMAX>
Sensors’.
Burglar sensor settings
1) Check the security sensor to be set by pressing the 'Areas (②)' button.
2) After settings, press ①(set) and the burglar sensor in adjusted area will be
started.
[Burglar sensor settings]
※ The number of burglar sensor settings images will be displayed as many as the
number of adjusted sensors.
Restore the burglar sensor
1) Press the 'Burglar sensor settings' button
2) Input the password and press the 'confirms'
3) If password is correct, the security mode will be restored
① ②
34