User Manual Color video door phone CDV-70U • Thank you for purchasing COMMAX products. • Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow instructions to use a product exactly. • The company is not responsible for any safety accidents caused by abnormal operation of the product.
Greetings ● Thank you for choosing COMMAX. ● Please read this manual carefully before you use the product. Table of contents Greetings ..................................................................................................................1 Contents table ...........................................................................................................1 1. Warnings and caution ...........................................................................................2 2.
1. Warnings and caution Please follow the things described below in order to prevent any danger or property damage. Warning Prohibition. No disassembly It may cause a serious damage or injury if violated. No touch Caution Must follow strictly. It may cause a minor damage or injury if violated. Shows plugging out the power cord without an exception Shows the warning and caution for an electric shock. Shows the warning and caution for a fire.
Cleaning & Use Warning Please don’t disassemble, repair or rebuild this product arbitrarily (please contact the service center if a repair is needed. ·It may cause an electric shock or fire. If an abnormal sound, burning smell or smoke is coming out of the product, please plug out the power cable and contact a service center. ·It may cause an electric shock or fire. Please don’t insert any metallic or burnable materials into the ventilation hole. ·It may cause an electric shock or fire.
2. Product Overview No. Description 1 Monitor 3 On/Off & status LED 2 4 5 6 7 8 No. 9 Description Talk Sound Level Control Speaker 10 Call Sound Level Control Microphone 12 Select Button Monitor Button Interphone Button Door Release Button Talk Button 11 13 Menu Button Up Button (△) 14 Down Button (▽) 15 Power Switch 16 Connector Terminal 1. Monitor : You can check the visitor. 2. Speaker : You can hear the calling sound from the door camera. 3.
3. Operation Methods 3-1. Receiving a calling from visitor. ① When the call button is pressed by a visitor on the door camera, the melody shall be rung and visitors' image is shown on the screen (If you do not press the Talk Button, the display will be shown up for 30 seconds and turned off automatically). ② By pressing the Call Button, you are able to talk with visitor.
4. Settings On talking or monitoring mode, press menu button on the right side of product, and press △/▽ buttons to adjust display(brightness, contrast, color), to enter the Utility menu, to check the product information. •Following 4 buttons on the right side of the product are used for setting. * Menu, End : MENU * Move up, right : △(UP Button) * Select, Input : SELECT * Move down, left : ▽(DOWN Button) 4-1.
② Select No. 1 : Talk LED is repeated bright and dark mode ③ Select No. 2 : All LEDs are repeated bright and dark mode ④ Select No. 3 : All LEDs are repeated bright and dark mode by turns ✽ Adjust LED dimming ① Move to UTILITY and press SELECT button and Move to LED dimming menu with △/▽ button. ② Press the SELECT button to enter the menu. (Adjusting level bar is shown) ③ Adjust the values with △/▽ button. ④ Press the SELECT button. (2) CHIME-BELL MUTE : Setting MUTE mode.
4-3. INFORMATION (Model and Version checking) Click △/▽ button to check the Model and version in configuration mode (1) Model : The name of Model (2) Version : The version of the product (3) VIDEO : The video type of the product (4) SOURCE : The location of the image 4-4. EXIT(End configuration) Move to EXIT and click Select button. 5. Installation 1.
6. Wiring CAMERA CONNECTOR POLARITY 1. RED : VOICE 2. BLUE : GND 3. YELLOW : POWER(+12V) 4. WHITE : VIDEO Caution on the Wiring Be sure to use a separate wiring for each connect 2lines of UTP CABLE[CAT.5] are required if UTP CABLE[CAT.
DOOR Camera Wiring • If UTP CABLE[CAT.5] is used, use 5 lines for GND line. INTERPHONE Wiring • If UTP CABLE[CAT.5] is used, use 5 lines for GND line.
7. Part list ① Body of CDV-70U ② Bracket for wall mount ③ Manual ④ GH1T 4 X 18 ZnY Screw for wall mount ⑤ PHM 3 X 6 ZnY Screw for body ⑥ 4P(2EA) Connector ① Monitor(CDV-70U) ② Wall bracket ③ Manual ④ Mounting Screw (SCREW GH1T 4X18 ZnY) – 4EA ⑤ Monitor fixing screw (SCREW PHM 3X6 ZnY) – 1EA ⑥ Connector (CONN.
8. Caution in use 1. Turn on the power switch. 2. Please contact your local agent for product maintenance when you have a problem in use of CDV-70U 3. For your safety, power switch with a safety device must be used in your building. 4. Unplug before installing or repairing the product. 5. Unplug when you connect monitor with door cameras. 9. Miscellaneous ● Please carefully read this User's Guide before calling service man After checking the entire check list, please contact customer service center.
513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea Int’l Business Dept. Tel. : +82-31-7393-540~550 Fax. : +82-31-745-2133 Web site : www.commax.com PM0270U00010 Printed In Korea / 2012.05.
