.in.ua www.commax.in.ua VIDEO DOOR PHONE Model No. CDV- 50AM Thank you for purchasing our COMMAX product. Please carefully read this User’s Guide (in particular, precautions for safety) before using the product and follow the instructions to use your productexactly. The company is not responsible for any safety accidents caused in abnormal operation of the product.
Warnings and caution 2 Table of Contents 4 Features 5 Entrance Image Saving & Setup 6 1. Entrance Image Saving 6 2.
Make sure to follow the instructions to prevent any danger or property losses. It indicates prohibition. Warning 2 It indicates prohibition of disassembly. Death or serious injury is expected. It indicates prohibition of contact. It indicates prohibition. Caution It indicates prohibition of disassembly. An injury or property losses are expected It indicates prohibition of contact. It indicates dos and don’ts. It indicates dos and don’ts.
* Volume control dial for conversation: Allows user to control incoming voice to handset. * Ring Volume Adjust dial: Allows user to adjust the volume of the ring tone * Brightness Adjust dial: Allows user to adjust the brightness of the screen * Contrast control dial: Allows user to contrast the screen. * Hue control dial: Allows user to adjust the hue of the screen Product Operating Methods Visitor Calls 1. A call from a visitor is established when the “ Call Button ” door camera is pressed.
2-1 Review Priority Calling When there is impeding noise that disturbs conversation from the door camera, pressing and holding the “PTT” button will deliver only the voice of the speaker from the CDV-50AM to the door camera unit to help clarify speech. While in review mode, the screen will show the image of the camera as displayed in the example below. At this time, the buttons/options on the right side of the screen will appear. Hide Prev 1.
Note : When deleting all images, the screen shown in Picture 3 will appear to confirm erasing all images. 2-5 Cam Setting This is to set which camera is to activate. 2-3 Auto Record Setting This is to set “auto record” mode to take a visitor’ s image when the user is away. Exit Cam Setting Prev Exit Auto Record Setting CAM1 - CAM2 Prev CAM1 SEL CAM2 YES SEL NO Picture 6 Cam Setting i.e.
* Wiring & Terminal Configuration Model CDV-50AM Spec. Wiring CAMERA 4-wires, INTERPHONE 4-wires Power Voltage AC 100-240V 50/60Hz (FREE VOLTAGE) Power Consumption CDV-50A Image Recording Call Method Equipment Specs Call sound Image Duration Call Distance 10 Maximum : 20W, Standby : 7W 128Cut HANDS FREE Calling (Voice Switch circuit) 5” COLOR TFT-LCD Electric chime : So, Mi, Do (twice) Interphone : “Beep” Standby : 60 sec, Call: 90 sec Entrance : 50m (0.65mm) Interphone : 20m (0.
a513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea Int’l Business Dept. : Tel.; +82-31-7393-540~550 Fax.; +82-31-745-2133 Web site : www.commax.com Printed In Korea/ 2007.
